Products   Performance Parts   Power Steering Conversion   Specials!

STEERING GEARBOXES

When we sell new Steering Gearboxes, it is usually factory original equipment or OE. These are the same parts that your dealer sells, except for much less.   When OE is not available, we have found quality manufacturers that can build steering Gearboxes to our highest standards. 

We know there is a choice out there, and even cheaper aftermarket suppliers of steering Gearboxes, but if you have to install it a few times, it is just not less expensive in the wrong run.  We find the best value for you, so you can be sure you are getting a great deal. 

When we sell remanufactured steering Gearboxes, it has been thoroughly rebuilt.  Each part has been gutted and gone through it tooth and nail.  Anything that does not meet the highest standards is thrown out, including questionable cores.  It is then rebuild with the best available seals, bushings, bearings and even gears.  Before any part is shipped, it is double tested on both air and hydraulic machines.  This enables the rebuilder to catch leaks, binders and every other problem before it leaves the shop.  No one else has standards this high.     

We do NOT sell Used, junk yard or what the industry refers to as 'spray and pray'.  This is where the parts are cleaned and painted without being remanufactured or even tested.  We have been testing quality and defect rates throughout the industry for almost two decades.  We know steering Gearboxes.  

We know that the steering Gearboxes we sell you are going to work the first time.  This is why we can afford to put full warranties on all of our parts.  Most steering racks have 3 year or better warranty and all steering Gearboxes have at least a 1 year or better warranty.  If your part fails during the course of that warranty we will ship you out a no charge replacement, we even pay for shipping!*  Only those of us who know what we are doing can afford to do that!

From our remanufacturer. . .

Discount Steering Gearboxes
The high quality of our Steering Gearboxes starts with the high quality components we use. Every Steering Gearboxes we receive is cleaned and carefully inspected. If any parts of the steering Gearboxes show signs of impact damage, the entire core is scrapped. We do not reuse any parts from impact damaged cores. Any metal or 'hard' parts that show signs of wear are also thrown out. All seals, bushings, and bearings regardless of their condition are replaced with very highest quality parts available. Only parts that have passed intense scrutiny go on to be remanufactured. The steps we take before the remanufacturing process begins may be a little extreme but we think you'll appreciate the difference it makes on the parts we sell and ensure that your steering Gearboxes will be of the highest quality.  

Many steering Gearboxes look the same on the outside but have subtle differences on the inside. We maintain a massive proprietary database to keep track of the different parts and variations of parts. Coupled with our knowledgeable staff, it helps ensure the Steering Gearboxes we send to you will not only bolt up correctly but also feel right when you drive. We stock steering Gearboxes for early model cars, late model trucks and everything in between. For those 'hard-to-get' steering Gearboxes that are not on our shelf, we can offer to remanufacture your existing steering Gearboxes with a very quick turn-around time. In most cases we are able to remanufacture and ship rebuildable Steering Gearboxes less than 24 hours after we receive them.